View HBSW-8500_1247413.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

H
Hewlett-Packard SmartWand Bar Code Reader Technical Data
HBSW-8000 Series Polycarbonate or Metal Housing
Features
* Automatically Decodes 9 Bar Code Symbologies - Code 39 - Standard or Extended - Int. 2 of 5 Code 128 - UPC A, E EAN 8, 13 - Codabar Code 11 - MSI Code Code 93 * LED Feedback * Low Current Draw * Programmable Either by Bar Code Labels or by Escape Sequences * Configuration Stored in NonVolatile Memory * CMOS/TTL Interface - Output 0 to 5 volts - Input up to 15 volts * Manufacturing - ISO 9002 Certified * Full One Year Warranty
Description
The Hewlett-Packard SmartWand Bar Code Reader is a bar code scanning wand with an integrated decoder. It transmits data to a computer via an asynchronous serial port, using CMOS level signals, at user definable baud rates. The SmartWand Reader's configuration may be changed by scanning special bar code menus, or by sending escape sequences to the wand from the host. The
configuration is stored in nonvolatile memory, allowing the SmartWand Reader to retain the configuration when the power is turned off. A Configuration Display option sends a summary of the configured options to the screen. In its default configuration, the SmartWand Reader can automatically recognize and decode 9 standard bar code symbologies. Configurable options include: symbology selection, checksum verification, length checking, message editing, LED feedback control, Code 39
digital wand emulation mode, serial port configuration, and various I/O protocols such as single read modes, Xon/Xoff pacing and no-read recognition. The polycarbonate-cased SmartWand Readers (HBSW8000,8200,8400) have an LED near the tip that flashes after a good read. The LED also flashes during bar code menu programming and to signal any self-test failures after power-up. All SmartWand Readers have an enhanced software version of Hewlett-Packard's proven
4-66
5965-5940E
decoding algorithm. The SmartWands are also very suitable for portable computer or terminal applications due to its low current draw.
Programmable Features
Bar code selection and decoding options Check character verification and transmission Serial port parameters and I/O protocols Message editing Header and terminators LED operator feedback Label length checking No Read recognition Digital wand Code 39 emulation
Environmental
Temperature: Operating: -20C to 70C (-4F to 158F) Storage: -40C to 70C (-40F to 158F) Humidity (Non-condensing): 95% at 40C (104F) max. Ambient Light: 100,000 lux (maximum) Rain: MIL-STD-810, Method 506, Procedure II (Polycarbonate) Dust: MIL-STD-810, Method 510 Shock: Ten drops to sealed concrete (random orientation) from 1.2 m (4 ft)
Visual Feedback LED
The SmartWand Readers with polycarbonate-cases have an easyto-see Feedback LED near the scanner tip that acknowledges a good read. This is useful in a noisy environment or where silence is required. Since the state of the LED can be controlled by escape sequences, the host processor can turn the LED on or off at any time.
Wand Specifications
Scan Speed ......... 7.6 to 127 cm/s (3 to 50 in/s) Tilt Angle ....................... 5 to 40 Minimum Contrast ............... 45% Color ................................... Black Wand Diameter ... 23 mm (0.9 in) Wand Length .... 160 mm (6.3 in) Weight: Aluminum .......... 153 g (5.4 oz) Polycarbonate ... 140 g (4.9 oz) Tip ................................ Sapphire
SmartWand Reader Configuration
The SmartWand Reader can be configured by scanning special bar code labels or by receiving escape sequence commands from the host. This allows decoding options and interface protocols to be tailored to a specific application. Configuration labels and a list of escape sequences are printed in the SmartWand User's Manual (P/N: HBSW-8997). The SmartWand Reader can display its current configuration on the host's screen. See sample.
Configuration Display
4-67
Electrical Interface
VCC Limits (V) Operating Absolute Rating Supply Ripple Min. 4.5 -0.3 Max. 6.0 6.0
Typical Current Draw - ICC (mA)
VCC Mode Idle Scanning With LED on 4.5 8 16 25 5.0 9 18 29 6.0 12 24 38
100 mV peak to peak
FCC Certification
HP's SmartWand Readers have received FCC certification for their standard configuration only. Any customer purchasing the product with stripped and tinned leads or a connector without adequate shielding has the responsibility to comply with FCC regulations. Moreover, if the HP SmartWand Reader is purchased without a connector, the product becomes defined as a subassembly and the FCC Identification number no longer applies. HP assumes no responsibility or liability for users of the HP SmartWand Readers without connectors that fail to comply with FCC regulations. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
General Mechanical Specifications
SAPHIRE TIP LED
H
23.0 (0.9)
HEWLETT PACKARD
160 (6.3) 19.0 (0.8)
790 (31) 590 (27) 24.9 33 (0.98) (1.3) 7.6 (0.3) 15.2 (0.6) 38.1 (1.5) 66 (2.6) 300 (12) 200 (8)
230 (9) 180 (7)
H
HEWLETT PACKARD
23.9 (0.94)
160 (6.2) 13.3 (0.52) DIA.
17.6 (0.69)
790 (31) 590 (27) 24.9 33 (0.98) (1.3) 7.6 (0.3) 15.2 (0.6) 38.1 (1.5) 66 (2.6) 300 (12) 200 (8)
230 (9) 180 (7)
DIMENSIONS IN MILLIMETERS (INCHES)
Model HBSW-8XXX Series
FCC Identification FCC ID: B94KDRZ
The CE Mark demonstrates compliance with EC directives on EMC.
4-68
Connector
The standard connector is a 9 pin male D connector. There is also an option for the cable to have stripped and tinned wires.
TxD Output Specifications
(VCC = 4.5 V, TA = 25C) Min. VOH 4.4 V @ 20 A 3.8 V @ 6 mA 0.10 V @ -20 A 0.33 V @ -6 mA 35 mA Max.
Pin Diagram
VOL Pin # 1 2 3 4, 5, 6 7 8 9 Shell Wire Color White Green Black Red Braid N/C TxD Transmitted Data (from the Reader) RxD Received Data (to the Reader) N/C Ground N/C VCC Shield Function IOL
TxD Circuit
TxD 74HCT240
Pin 3 RxD - The received data signal RxD expects the standard asynchronous serial data format. It will accept either CMOS level or true RS-232 level signals. The figure below shows the equivalent input circuit.
Shield and ground are tied together in the connector.
RxD Input Specifications
(VCC = 5.0 V, TA = 25C) VIH VIL 2.0 V 500 A 0.8 V @ 1 A
1
2
3
4
5
6
7
8
9
RxD Circuit
100 k RxD 4.7 k 74HCT240
MALE 9 PIN SUBMINIATURE D CONNECTOR
Pin Description
Pin 2 TxD - The data output signal TxD obeys standard serial asynchronous data formats, but uses zero to five volts CMOS logic levels. It can be described as CMOS level RS-232. The TxD output circuit is shown in the figure below. It will drive TTL, LSTTL, CMOS, HC, and HCT inputs. Note: If the part is purchased with stripped and tinned wires, or if the connector is removed, the ground and shield wires must be connected together for proper operation.
4-69
Ordering Information Warranty and Service
Part Number HBSW-8000* HBSW-8100* HBSW-8200 HBSW-8300 HBSW-8400* HBSW-8500* Housing Polycarbonate Metal Polycarbonate Metal Polycarbonate Metal Resolution Low - 0.33 mm (0.013 in) Medium - 0.19 mm (0.0075 in) High - 0.13 mm (0.005 in) 820 nm HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 655 nm LED Wavelength 655 nm The Hewlett-Packard SmartWand Bar Code Reader is warranted for a period of one year from date of purchase covering defects in material and workmanship. Hewlett-Packard will repair or, at its option, replace products that prove to be defective in material or workmanship under proper use during the warranty period.
* Low and High Resolution SmartWand Readers are built to order devices.
SmartWand Kits
HBSW-8205 - Polycarbonate SmartWand Kit Includes: HBSW-8200 General Purpose Reader HBSW-8997 User's Manual HBCS-2998 Black Wand Holder HBSW-8305 - Metal SmartWand Kit Includes: HBSW-8300 General Purpose Reader HBSW-8997 User's Manual HBCS-2998 Black Wand Holder
SmartWand Accessory Part Numbers
HBSW-8997 HBCS-2998 HBSW-8991 HBCS-4999 HBCS-A990 User's Manual Wand Holder (black polycarbonate ) Replacement Polycarbonate Case with LED Window and Tip Replacement Tip for Metal Case Plastic Case Replacement Tool
4-70

▲Up To Search▲

Price & Availability of HBSW-8500

	To Download HBSW-8500 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .